background image

                                                                                                                                                        XU875  &  XR895

2

Thank you for your purchase of this quality stationary bike trainer from Spirit
Manufacturing, Inc. Your new bike was manufactured by one of the leading fitness
manufacturers in the world and is backed by one of the most comprehensive warranties
available. Through your dealer, Spirit will do all we can to make your ownership
experience as pleasant as possible for many years to come. The local dealership where
you purchased this bike is your administrator for all Spirit warranty and service needs.
Their responsibility is to provide you with the technical knowledge and service personnel
to make your experience more informed and any difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their telephone
number, and the date of purchase below to make any future, needed contact easy. We
appreciate your support and we will always remember that you are the reason that we
are in business. Please complete and mail your registration card today and enjoy your
new bike.

Yours in Health,
Spirit Manufacturing, Inc.

Name of Dealer______________________________________
Telephone Number  of Dealer___________________________
Purchase  Date_______________________________________

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below.

Serial Number

_______________________________________

REGISTER YOUR PURCHASE

The self-addressed product registration card must be completed in full and returned to
Spirit Manufacturing Inc. or visit www.spiritfitness.com to register online.

ver. A

CONGRATULATIONS ON YOUR

NEW BIKE AND WELCOME

TO THE SPIRIT FAMILY!

Product Registration

Summary of Contents for XR895




































Reviews: