19
XIC600
CONSOLE OPERATION
PLEASE NOTE:
1. The Cycling Monitor system is designed as sealed unit and not
meant to be opened other than for the sole purpose of installing
batteries. Any opened units will void the warranty.
2. To clean the Cycling Monitor use a clean damp cloth. Use of any
caustic cleaning solutions will void the warranty.
3. The Cycling Monitor system is NOT waterproof, only water
resistant. Any excessive exposure to water will void the warranty.
CONSOLE SPECIFICATION
CADENCE BAR GRAPH: 0~200rpm/10rpm per Bar
RPM : 0 ~ 240 RPM
SPEED : 0 ~ 96 KM/H (0 ~ 60 mph)
PULSE : 30 ~ 240 BPM
Time : Count down range 1~99 Minutes
Count up range 00:01~99:59
IMPORTANT SAFETY INSTRUCTIONS WARNING
BEFORE BEGINNING THIS OR ANY OTHER EXERCISE PROGRAM,
CONSULT A PHYSICIAN. THE PHYSICIAN CAN HELP YOU BETTER
DETERMINE WHAT ACTIVITIES OR PROGRAMS ARE MOST SUITED
FOR YOU. IF AT ANY TIME DURING THE WORKOUT YOU FEEL
FAINT, OR CHEST PAINS, OR SEVER SHORTNESS OF BREATH,
STOP EXERCISING IMMEDIATELY AND CONSULT A PHYSICIAN.
The Cycling Console carton consists of a computer console, speed
sensor transmitter. The transmitter counts the number of times the
magnet, which is mounted on the crank assembly, passes the sensor. The
speed sensor transmitter will then send a coded signal to the console
which contains the measured value (Speed and Cadence ).
Both the computer console and the speed sensor transmitter use AAA
type batteries. Please install the supplied AAA batteries in the computer
console and speed sensor transmitter before using.
