13
Model
XE520s
Service
Replacing parts
Part
7. Cross Bar
Rev.
1
2
3
4
Procedures
：
1.
Follow procedure 6 to take apart
Chain Covers.
2.
Take off Round Disk Cover and use
12 mm and 6 mm wrenches to
release 5/16
"
x15mm Hex Head Bolt
and 5/16
"
x35x1.5T flat washer
together with M8 × 30m/m_Socket
Head Cap Bolt to take apart the
Cross Bar, as shown in figures 1, 2
&3.
3.
Use Phillips head screw driver to
release eight 5x16mm Tapping
Screws, which secure Round Disk
on the Cross Bar, and separate two
parts apart, as shown in figure 4.
