XE320 Elliptical
13
Getting familiar with the control panel
Power up
When power is connected to the Elliptical the console will automatically power up. The elliptical
does not
have a power switch. If there is no speed input to the console for 20 minutes the console will go to “Sleep”.
To turn the console on when it is in sleep mode press any key. When the console is asleep the elliptical
draws a tiny amount of electric current; similar to a TV when it is turned off.
When it is first powered on the console will perform an internal self-test. During this time all the lights will
turn on. When the lights go off the dot matrix display will show a software version (i.e.: VER 1.0) and the
message window will display an odometer reading. The odometer reading displays how many hours the
elliptical has been used and how many virtual Klms the elliptical has gone. The time in hours will be to the
left and the odometer in Klms will be displayed to the right.
Operation of Your Elliptical
