Spirit P8Q67-M-DO, User Manual, Page: 72 / 176

Spirit P8Q67-M-DO (Eng) Rev 1
60

Unplug the power cord from the wall socket before touching any component.

Use a grounded wrist strap or touch a safely grounded object or to metal
object, such as the power supply case, before handling components to avoid
damaging them due to static electricity

Hold components by the edges to avoid touching the ICs on them.

Whenever you un-install any component, place it on a grounded anti-static
pad or in the bag that came with the component.

Before you install or remove any component, ensure that the power supply is
switched off or the power cord is detached from the power supply. Failure to
do so may cause severe damage to the motherboard, peripherals, and/or
components.
Onboard LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode.
This is a reminder that you should shut down the system and unplug the power cable before
removing or plugging in any motherboard component. The illustration below shows the
location of the onboard LED.