Spirit P8Q67-M-DO, User Manual, Page: 128 / 176

Spirit P8Q67-M-DO (Eng) Rev 1
116
[ RAID Mode] Set to [RAID Mode] when you want to create a RAID configuration from
the SATA hard disk drives.
Serial-ATA Controller 0 [Enhanced]
This item appears only when you set the SATA Mode item to [IDE Mode].
[Disabled] Disables the SATA function.
[Enhanced] Set to [Enhanced] to support more than four SATA devices.
[Compatible] Set to [Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four
SATA devices are supported under these operating systems.
Serial-ATA Controller 1 [Enhanced]
This item appears only when you set the SATA Mode item to [IDE Mode].
[Disabled] Disables the SATA function.
[Enhanced] Set to [Enhanced] to support more than four SATA devices.
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system.
When read/write of your hard disk errors occur, this feature allows the hard disk to
report warning messages during the POST . Configuration options: [Enabled] [Disabled]
Intel TXT(LT) Configuration
Secure Mode Extensions (SMX) [Disabled]
Allows you to enable or disable the Intel Secure Mode Extensions (SMX) technology.
Configuration options: [Disabled] [Enabled]
Intel TXT(LT) Support [Disabled]
This item can be configured only when the Intel SMX, Intel Virtualization Technology
(VT), and Intel Virtualization Technology for Directed I/O (VT-d) technologies are all
enabled. Allows you to enable or disable the Intel Trusted Execution Technology.
Configuration options: [Disabled] [Enabled]
USB Configuration
The items in this menu allow you to change the USB -related features.

The USB Devices item shows the auto-detected values. If no USB device is
detected, the item shows None .
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating systems (OS).
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
EHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an EHCI hand-off feature.