Downloaded from
www.Manualslib.com
manuals search engine
Using the Lancing Device
You will need a lancing device in order to collect a blood sample.
You may use the lancing device contained in the TEE2 Blood
Glucose Monitoring System or any other medically approved
lancing device.
Preparing the Lancing Device
Step 1
Wash hands and sample site with
Adjustable Tip
Lancet Holder
Ejection System
soap and warm water. Rinse and dry
thoroughly.
Lancet
Release Button
Sliding Barrel
Step 2
•
The lancing device should not be used by more than one
individual. Ensure the lancing device is not shared among
different users.
•
Use a soft cloth or tissue to wipe the lancing device.
If necessary, a small amount of alcohol on a soft cloth or
tissue may be used.
Unscrew and remove the lancing
device tip.
Step 3
Firmly insert a new lancet into the
lancet holder. Hold the lancet firmly.
Gently twist to pull off protective disk.
Save disk to recap lancet after use.
Replace lancing device tip.
Caution:
To avoid infection when drawing a sample, use a lancet only
one time, and:
•
Do not use a lancet that has been used by others.
•
Always use a new sterile lancet.
•
Keep the lancing device clean.