Group Exercise Elliptical
11
•
Tilt the elliptical to one side and put something under the unit for support and install the
three levelers (40) for that side. Tilt the unit to the other side and install those three levelers
(40). Level the elliptical once it is positioned where it will be used. Screw the two middle
levelers all the way in and the front and rear levelers all the way in, then back them out
about two or three turns. Level the unit using only the front and rear levelers first, then adjust
the middle levelers so they touch the floor. Make sure to lock the levelers when finished.
•
Install the transport wheels (79) with the two 5/16” x 1-3/4” bolts (44) and 5/16” nuts (45).
•
Press the six plastic end caps (83) into the oval stabilizer tubes.
STEP 4: LEVELERS & END CAPS
