Customer service 1-888-707-1880
Dyaco Canada Inc 2017
Email: [email protected]
15
Quick Start:
•
Press “START” button and the console start performing the program. Press “LEVEL” up/down
buttons further to change the resistance level you desire.
• Press “HOME” button on the top left corner or “STOP” to pause your workout.
Featuring Functions of this Bike:
Touch-control screen is installed for the operation. You can directly touch any functional button on the
screen or through buttons on the bottom to control. On the bottom, there are “Resistance” up/down
buttons to control the resistance level, “START” button to begin the workout, “STOP” button to
pause/stop running and “FAN” button to the fan on or off.
Pause/Stop:
• Press “STOP” button once or “HOME” button on the screen, the bike will stop and keep values of
time, distance and calorie on the screen. The screen will count down for 5 minutes then reset.
• Press “START” button to continue the workout during pause.
• Press “STOP” button twice, the console will ask you if you want to end the workout. If “STOP”
button is pressed the third time, the console will display your workout summary.
Heart Rate Feature:
Pulse (heart rate) on the screen shows the current value of the heart beats per minute. You must hold
both left and right stainless steel sensors to test the pulse. The pulse value will be shown on the
screen continuously. You can also use hand pulse sensors for heart rate control. The console can
also detect the pulse from a wireless chest strap.
To Turn Off the Bike:
The screen will turn it off (sleep status) when there is no command within 30 minutes. This is called
sleeping mode and the bike will stop most of its activity except the minimum circuit detecting system
for press buttons so that when there is any button activation, the treadmill restarts. There is only very
little electric current (like a TV turned off) in the sleeping mode. It is fine to leave the main power
switch on during sleeping mode.
Audio:
To listen to any audio source with this unit, you must plug a headset into the port on the console.