CUSTOMER SERVICE 1-888-707-1880
12
Maurice Pincoffs Canada Inc. ©2012
OR EMAIL [email protected]
OPERATION OF YOUR CONSOLE
GETTING FAMILIAR WITH THE CONTROL PANEL
POWER UP
When the A.C. power cord is connected to the Elliptical, the console will automati- cally
power up. If there is no input to the console for 20 minutes the console will go to stand-
by mode. In stand-by mode the console display will turn off. To turn the console on
press any key.
When initially powered on the console will perform an internal self-test. During this time
all the lights will turn on. When the lights go off, the
Message Center
will show the
software version (i.e.: VER 1.0). The distance window shows the distance in miles and
the time window shows the total hours of use.
The odometer will remain displayed for only a few seconds then the console will go to
the start up display. The dot matrix display will be scrolling through the different profiles
of the programs and the
Message Center
will be scrolling the start up message. You
may now begin to use the console.
