Customer Service 1-888-707-1880
Maurice Pincoffs Canada Inc.©2011
Email: [email protected]
22
USER PROGRAMS
STEP 1: Select
User 1
or
User 2
program key then press
Enter
. Note
that the dot matrix display portion will have a single row of segments at
the bottom (Unless there is a previously stored program).
STEP 2: The customer can to set the user name on this step and fallow
the directions in the message window.
STEP 3: The Message center will now be blinking an
Age
value. Adjust the age and press enter.
STEP 4: The Message center will now be blinking a bodyweight value.
Enter your bodyweight and press
Enter
.
STEP 5: Note the clock/Message center is flashing. Use the or -
keys to adjust up from 30 minutes (if desired). Press the
Enter
key. This
is a must to continue even if time is not adjusted.
STEP 6:The
Message Center
will now be blinking the preset top speed
(3 mph or 3 kmph) of the program. Use the
Speed +
or - keys to adjust,
then press
Enter
. Each program has various speed changes throughout;
this allows you to limit the highest speed the program can reach.
STEP 7: The first column (segment) will now be blinking. Using the + or -
keys, adjust the speed level to your desired effort for the first segment
then press enter. The second column will now be blinking. Repeat the
above process until all 18 segments have been programmed. The first
column will be blinking again. This is for the incline programming. Repeat
the above process to program all 18 segments for incline.
STEP 8: Press the
Start
button to begin the workout and also save the
program to memory or press
Stop
to go back one step to reprogram.
