background image

Customer Service 1-888-707-1880 

 

                                                                   

 Dyaco Canada Inc. 2016 

Email: [email protected] 

 

 

4

 

IMPORTANT 

SAFETY INSTRUCTIONS

 

THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY 

READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL 

     
    

CAUTION

 

Before starting any exercise program, it is recommended that you consult your 

                        

physician. 

   

WARNING

:  Connect this unit to a properly grounded outlet only. 

   

DANGER

:  

 

To reduce the risk of electric shock, always unplug the treadmill from the electrical  

                       

outlet immediately after using and before cleaning. 

 

WARNING 

TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO 
PERSONS:

 

Grounding Instructions 

This product must be grounded. If it should malfunction or breakdown, grounding provides a 
path of least resistance for electric current to reduce the risk of electric shock. This product is 
equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug 
must be plugged into an appropriate outlet that is properly installed and grounded in 
accordance with all local codes and ordinances. See diagram below for grounding methods

 

1. Use 110 volt a.c. household current on a dedicated circuit.

 

2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of 

all warnings and precautions. 

3.  The use of an extension cord with this product is not recommended. If an extension cord is needed, 

use a short (less than 10 feet) heavy gauge (14 gauge or better) extension cord with a three prong 
(grounded) plug and receptacle. 

4. Never leave the treadmill unattended when plugged in. Remove the safety key and unplug the unit 

from the outlet when not in use and before removing or replacing parts. 

5.  Never operate the treadmill if it has a damaged cord or plug, if it is not working properly, if it has been 

dropped, damaged, or exposed to water. Never move the treadmill belt while the power is turned off. 

6.  Do not pull the treadmill by the power supply cord or use cord as a handle. Keep cord away from 

heated surfaces and open flames. 

7.  Fitness equipment must always be installed and used on a flat surface. Do not use outdoors or near 

water. Do not place the unit on a loose rug or uneven surface. It is recommended to use an 
equipment mat to prevent the unit from moving while it is being used, which could possibly scratch or 
damage the surface of your floor. It is recommended to have a minimum of 3 meters safe clearance 
on all sides of the treadmill while in use. 

Summary of Contents for 16007603850









































Reviews: