background image

32

Spirit Fitness

During The Test:

• 

The console must be receiving a steady heart rate for the test to begin. You may use the hand pulse sensors or wear 

a heart rate chest strap transmitter.

• 

You must maintain a steady 50 rpm pedal speed. If your pedal speed drops below 48 rpm or goes above 52 rpm  

the console will emit a steady beeping sound until you are within this range.

• 

You may scroll through the various data readings by pressing the 

Display button

 under the 

Message Window

.

• 

The 

Message Window 

will always display your pedal speed on the right side to help you maintain 50 rpm.

• 

The data shown during the test is:

1.  Work in KGM is actually an abbreviated form of kg-m/min. which is a work measurement of kilogram-force meter/minute

2.  Work in Watts (1 watt is equal to 6.11829727787 kg-m/min.)

3.  HR is your actual heart rate; TGT is the target heart rate to reach to end the test.

4.  Time is the total elapsed time of the test.

After The Test:

 

ƒ

Cool down for about one to three minutes.

 

ƒ

Take note of your score because the console will automatically return to the start-up mode after a few minutes.

Summary of Contents for CE900ENT









































Reviews: