Customer Service 1-888-707-1880
Dyaco Canada Inc
Email: [email protected]
18
TROUBLESHOOTING
Issue Possible
Cause Instructions
Water changes color
or becomes cloudy
Rower is in direct sunlight or has
not had water treatment
Local tap water is of poor quality
Change rower location to
reduce direct exposure to
sunlight. Add water treatment or
change tank water as directed
on page 11 of this manual.
Consider using distilled water to
refill tank.
Inconsistent readings
on the console for
500meter split time
and SPM (strokes per
minute)
Sensor gap issue
Faulty sensor
Sensor has moved out of position
Wiring harness issue
Use the back cover of the
computer as a “gap tool” to
check the gap between sensor
head and magnetic ring, or see
if the sensor head has moved
out of position. Please contact
your nearest SPIRIT customer
service center for details.
The console does not
illuminate after battery
installation
Batteries installed incorrectly
or need replacing
Check to see if the batteries are
installed in the correct position.
Reinstall or replace as not
illuminate after needed. If the
LCD screen fails to illuminate,
try rotating the batteries slightly
in the computer. If this fails,
contact your local service
center.
The console screen
illuminates, but does
not register when
rowing
Loose or failed connection
Sensor gap too wide
Check that the computer lead is
connected properly. If it is
connected then contact your
local service center. Check
sensor gap.
Please contact your Dyaco Canada Customer Service if any assistance is required.
