Customer Service 1-888-707-1880
Dyaco Canada Inc
Email: [email protected]
17
While in Engineering Mode if there is no activity for 30 seconds, the console will switch
STANDBY
Mode. Pressing the Reset button will exit the Engineering Mode. The
console settings and ODO will not be reset using the "RESET Mode",
however, removing the batteries will return the console to original factory settings and the
ODO value will be zero.
AUDIO ON/OFF
Under Engineering Mode of the Audio ON/OFF setting. The SOUND sign will blink. Press
Enter to get into
After pressing Enter, the console will display “ON” or ”OFF”
If- the audio is on, the “ON” sign will blink.
If- the audio is off, the “OFF” sign will blink
Press Enter to confirm and the console will return to Engineering Mode.
While in this setting if there is no activity for 30 seconds or pressing Reset, the console will
switch STANDBY Mode
ODO
The “ODO” feature displays the total time usage for your machine as H : M : S (hours,
minutes, and seconds). Once the time odometer reaches the 2-hour mark, the
odometer will begin to display the time in 1-hour increments. For example, “3H” would
indicate 3 hours of total usage.
• When cycling through options in “Engineering Mode”, press enter when “ODO” is blinking
on the display.
• When the total exercise time exceeds 1:59:59, the LCD will display the numerical hour
number next to an “H” (hours).
• To exit, press the q or p button to switch between other Engineering modes.
• While in this setting if there is no activity for 30 seconds, the console will enter
STANDBY Mode. Pressing the Reset button twice will exit the Engineering Mode.
GENERAL MAINTENANCE
A regular preventative maintenance schedule with your fitness equipment ensures that
products are working at an optimal condition without affecting your exercise experience. To
assist in the maintenance regimen, it is recommended to break service into daily, weekly, &
monthly activities.
All preventive maintenance activities must be performed on a regular basis. Performing
routine preventive maintenance actions can aid in providing safe, trouble-free operation of
all SPIRIT equipment. SPIRIT is not responsible for performing regular inspection and
maintenance for your machines. Be sure to train all necessary personnel in equipment
inspection and maintenance actions, in addition to proper accident reporting and record
keeping.
Item Time
Frame
Instructions
Notes
Seat and Seat Rails Weekly
Wipe down seat rails with lint free
cloth
Frame
Weekly
Wipe down frame with lint free cloth
Tank and Water
Treatment
12m to 2years
Follow instructions as specified on
page 11. of the manual.
Rowing Belt
Check every hundred
hours for correct tension
and for signs of wear.
The rowing belt should provide many
years of trouble free use. If a rowing
belt replacement is required,please
contact your local service
representative for further details.
