Spirent TestCenter, Getting Started With

Page: 40 / 86

Getting Started
Procedure 8: Set the Chassis IP Address
40 | Getting Started with Spirent TestCenter
Procedure 8: Set the Chassis IP Address
Spirent chassis have a default IP address. The default IP address is 192.168.0.100 with a
netmask of 255.255.255.0. This enables quick and easy connection and start up of your
chassis, without the need to use the serial connection.
To view the default address:
•
Use an SSH connection (all chassis)
•
Use a direct console, built-in touch screen, or web client connection (SPT-N4U and
SPT-N11U)
•
Use a direct console or web client connection (SPT-N12U)
When the connection is established, apply the appropriate commands.
Notes: •
For complete setup information about the Spirent PX3/DX3-QSFP-DD-8
appliances, refer to the installation documentation that is included in your
shipment. You can also find installation and quick reference documents in the
Knowledge Base. Search on DOC11449 and DOC11450.
•
For complete setup information about the Spirent C1 appliance (SPT-C1),
refer to the installation documentation that is included in your shipment. You
can also find installation and quick reference documents in the Knowledge
Base. Search on DOC10338 and DOC10339.
Changing the Default IP Address
SPT-N12U
For the SPT-N12U, you can set a unique IP address by using any of the following:
•
Direct video and keyboard console - see “Setting the IP Address using the SPT-N4U,
SPT-N11U, or SPT-N12U Direct Console Connection” on page 42 .
•
SSH (Ethernet) - see “Setting the IP Address using SSH (all chassis)” on page 43 .
•
Web client pointed to the chassis IP address - see “Setting the IP Address using Web
Client (SPT-N4U, SPT-N11U, or SPT-N12U)” on page 44
You can also use this connection to configure the chassis’ netmask and gateway values.
SPT-N4U and SPT-N11U
For the SPT-N4U/SPT-N11U, set a unique IP address using any of the following methods:
•
Front panel touchscreen - see “Setting the IP Address using the SPT-N4U or SPT-
N11U Front Panel Touchscreen” on page 41 .
•
Direct video and keyboard console - see “Setting the IP Address using the SPT-N4U,
SPT-N11U, or SPT-N12U Direct Console Connection” on page 42 .
•
SSH (Ethernet) - see “Setting the IP Address using SSH (all chassis)” on page 43 .
•
Web client pointed to the chassis IP address - see “Setting the IP Address using Web
Client (SPT-N4U, SPT-N11U, or SPT-N12U)” on page 44 .