Tech-X Flex™
Base Unit User Guide Issue 1
2: Wi-Fi Testing Menu
2-9
Intro
Wi
-F
i
10/100
Syste
m
IP/V
ide
o
S
pec
s
Figure 2-4 Wi-Fi Connect parameters (Page 1)
Results - Connect (Wi-Fi Setup)
The unit reports whether the connection was successful or not. If the connection is successful, the SYNC
LED lights as solid green. If the connection failed and you don’t know why, see
NOTE:
After connection, you must obtain an IP address if you want to do any IP-based testing. For
more information, see
2.3.3 Wi-Fi Setup > Details
This function reports the details of the currently-active Wi-Fi connection. Results include:
Table 2-4
Details (Wi-Fi Setup) - Results
Result
Description
SSID
(Service Set Identifier) Network name, as configured in the wireless router.
MAC Address
The hardware address of the physical interface at the wireless access point. This
should be a unique identifier of the hardware.
Mode
Network type, normally MANAGED. Adhoc networks are not supported.
