manualshive.com logo in svg

Spirent Tech-X Flex, User Manual

Share
Download
Spirent Tech-X Flex User Manual Download Page 46

 Base Unit User Guide Issue 1

Tech-X Flex™ 

 4-4

4: System Menu

Intro

Wi
-F

i

10/100

Sy
stem

IP/V

ideo

S

p

ecs

4.4  Auto Sleep Mode

Select 

System > Auto Sleep Mode

.

This function sets the maximum amount of idle time after which the unit automatically enters “sleep 
mode” in order to save battery power. It does not apply when the unit is powered by an external source. 
For more information on sleep mode, see 

Powering on/off and sleep mode

 on page 1-9.

4.5  Version Info

Select 

System > Version Info

.

This function provides information about hardware and firmware versioning currently applicable to the 
unit, including the attached module, if any. This information may be required when obtaining technical 
support from Spirent. It may also be useful for verification before and/or after firmware upgrades.

Figure 4-3  Version Info

4.6  Battery Status

Select 

System > Battery Status

.

This function provides detailed information about the battery and current charging conditions. For the 
general user, the 

Estimated Remaining Capacity

 percentage may be the most useful.

Summary of Contents for Tech-X Flex





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands