IM-P015-04-EN-ISS2
CMGT
5
2.1 General description
The
TD62LM
and
TD62M
are maintainable high pressure thermodynamic steam traps with integral strainer
and a replaceable seat to ease maintenance. They have been designed specifically for steam mains drainage
applications. The body castings are produced by a TÜV approved supplier in accordance with AD-Merkblatt
WO/TRD100 and are available with screwed, socket weld or flanged connections.
The
TD62LM
is specifically designed for relatively small condensate loads on superheat and mains drainage
applications.
An insulating cover is fitted as standard on both the TD62M and TD62LM.
Available types
TD62LM
with low capacity orifice.
TD62M
with standard orifice.
Standards
This product fully complies with the requirement of the Pressure Equipment Directive (PED).
Certification
This product is available with certification to EN 10204 3.1.
Note:
All certification/inspection requirements must be stated at the time of order placement.
Note:
For additional information see the following Technical Information Sheets:
TI-P068-08 (screwed and socket weld),
TI-P068-19 (EN body with flanged connections),
TI-P068-20 (ASTM body with flanged connections).
2.2 Sizes and pipe connections
ASTM body - ASTM A217 WC6
½
",
¾
" and 1" with screwed NPT or socket weld (ASME/ANSI B 16.11 Class 3000) connections DN15, DN20
and DN25 - standard flanges ASME/ANSI B 16.5 Class 300 and 600, JIS/KS 40.
EN body - EN 10213-2 G17 CrMo5-5+QT
DN15, DN20 and DN25 - standard flange EN 1092 PN100.
Fig. 2 Flanged
Fig. 1 Screwed/socket weld
2. General product information
Summary of Contents for TD62LM
Page 20: ...IM P015 04 EN ISS2 CMGT 20 ...
