20
Main output
Y1
(configurable)
Single or dual, with direct or reverse action
Discontinuous
Relay with dual action 2 contacts NA, 5A/250Vac, 2x10 coeff.5
transitions
Logic
0.18 Vdc, 20mA max. (for static relays)
galvanically
isolated
Continuous
Current
4..20mA(450
W
max.,10 Volts max.)
Voltage
0..10Vdc(450
W
min. 20 mA max.)
Maximum output
10..100% (1
st
channel ) -10..-100% (2n
d
channel )
Event/
Alarm
outputs
Y2 - Y3
(configurable)
Relay
2 contacts NA, 5A/250Vac, 2x10(coeff.5) transitions
Action mode
active high (above the set point)
active low (below the set point)
Hysteresis
0,1..10%
Type of Set point
deviation
± 300 steps (with or without
inhibited startup)
band
0..300 steps
independent
from beginning to end of scale
Special functions
Loop-Break-Alarm
(control loop defect)
Retransmission
output Y4
(SX75+ only)
Current
4..20mA(450
W
max.,10Vdc max.)
galvanically
isolated
Voltage
0..10Vdc(500
W
min.,20mA max.)
Serial
commnication
(SX75+ only)
Interface 20mA C.L. passive and galvanically isolated (see manual MIU-CS/E)
or RS485 port
Protections
Access to parameters
On three levels for: modification, indication only,
no access
Immunity to disturbances level IV, standard IEC 801-4
All significant data are stored in a non-volatile memory
Single
power
supply
Standard model
100..240V, 48..63Hz, -15% + 10% 250 Vac max
Low voltage model
24V, 48..63Hz, -15% + 10% or 24Vdc ± 15%
Absorbed power
about 4VA
Auxiliary
power supply
24Vdc ± 10%, 20mA max.
General
features
Isolation group
C according to VDE 0110
Climatic group
KWF according to DIN 40040
Ambient temperature
0...50°C., humidity 35...85uR%
Protection
Front:IP54 standard (IP65 with Kit AXIP65- 1)
Cover: IP30, terminal board IP20
Material
Self-extinguishing UL94V1
Weight
Approx 480 g.
Dimensions
48 x 96, depth 150mm, according to DIN 43700
for 2-wire or 3 or 4-wire transmitter
10. TECHNICAL DATA