IM-P402-62 AB Issue 5
2
1. General safety information
Fig. 1
LT2010
>100%
>0%
Power on
Span
Span adjust
Zero adjust
Zero
Clamping screw
Clamping screw
Your attention is drawn to Safety Information Leaflet IM-GCM-10 as well as to any
National or local regulations.
Safe operation of the product depends on it being properly installed, commissioned
and maintained by a qualified person in compliance with the operating instructions.
It is essential to comply with general installation and safety instructions for pipeline
and plant construction, as well as to make proper use of tools and safety equipment.
The product is designed and constructed to withstand the forces encountered
during normal use. Use of the product for any other purpose, or failure to install the
product in accordance with these Installation and Maintenance Instructions, could cause
damage to the product, will invalidate the marking, and may cause injury or fatality
to personnel.
Warning
Isolate the mains supply before unplugging the transmitter since hazardous voltages will
be exposed on the transmitter base. This product complies with the requirements
of Electromagnetic Compatibility Directive 89 / 336 / EEC by meeting the standards of:
-
BS EN 50081-1 (Emissions) and
-
BS EN 61000-6-2 (Immunity).
The following conditions should be avoided as they may create interference above
the limits specified in BS EN 61000-6-2 if:
-
The product or its wiring is located near a radio transmitter.
-
Excessive electrical noise occurs on the mains supply. Power line protectors (ac)
should be installed if mains supply noise is likely. Protectors can combine filtering,
suppression, surge and spike arrestors.
-
Cellular telephones and mobile radios may cause interference if used within
approximately 1 metre (39") of the product or its wiring. The actual separation distance
necessary will vary according to the surroundings of the installation and the power
of the transmitter.
If this product is not used in the manner specified by this IMI, then the protection
provided may be impaired.
