IM-P179-15
CMGT Issue 3
7
2.1 General description
The FT_62 range of ball float steam traps have an automatic built-in air venting facility.
FT_62 range:
Available types
Model
Body and cover
Optional extra
FTC62
Carbon steel body with
stainless steel internals
On request the cover (
2
) may have been
drilled and tapped for the purpose of fitting
a balance line - This option will only be
supplied if requested at the time of order
placement.
FTS62
Stainless steel body with
stainless steel internals
Flow options
when facing
the body
L-R
Has a flow direction of
Left-to-Right
or
R-L
Has a flow direction of
Right-to-Left
Standards
These products fully comply with the requirements of the Pressure Equipment Directive (PED) and carries
the
mark.
Certification
These products are available with certification to EN 10204 3.1.
Note:
All certification/inspection requirements must be stated at the time of order placement.
Note:
For additional product information see the following Technical Information sheets:
FTC62
TI-P179-13
and
FTS62
TI-P179-14
2.2 Sizes and pipe connections
½
",
¾
" and 1"
Screwed BSP or NPT
½
",
¾
" and 1"
Socket weld ends to BS 3799 and Class 3000 lbs
Standard flanges:
DN15, DN20 and DN25
Flanged EN 1092-1 PN100
Please note: For the PN100 variant the material used for the weld on flange
is carbon steel 1.0460 for the FTC62 and stainless steel 1.4301 upon the
FTS62.
The material used for the studs and nuts upon all versions is Studs = ASTM
A193 B7
Nuts = ASTM A194 Gr. 4 to EN 10269
½
",
¾
" and 1"
Flanged ASME B 16.5 Class 600
2. General product information
Summary of Contents for FTC62
Page 26: ...IM P179 15 CMGT Issue 3 26...
