MAINTENANCE AND SERVICING
6.
Spark Ignition (where fitted)
Disconnect from gas supply (1). Remove appliance from housing (2).
Grill burner –
At rear of appliance remove the screw from the bracket and spark
ignition probe. Trace the electrode wire back to the generator and pull off the
connector.
Oven burner -
Trace the electrode wire up the back of the cooker to the generator
and pull off the connector. Unscrew the fixing screw on the spark electrode inside
the oven cavity, then carefully pull the electrode from inside the oven and remove.
Piezo Spark Generator replacement -
Remove all electrode wires. Remove the
lock nut and carefully remove from panel.
12v Spark Generator replacement -
Located at the rear of appliance. Remove all
electrode wires, unscrew the two retaining screws and lift off the unit.
7. Grill burner injector (No62)
Disconnect from gas supply (1). Remove appliance from housing (2).
Release the locking screw on the injector holder, disengage the grill pipe from the
control and remove the injector.
8.
Oven burner injector (No59)
Open the oven door and unscrew the burner retaining screw, slide the burner to the
left and lift out. The injector is exposed to the right hand side of the cut out.
Unscrew the injector.
9. Thermocouple replacement
Disconnect from gas supply (1). Remove appliance from housing (2).
Grill burner
- Unscrew the thermocouple from the control. Unscrew the nut at the
burner.
Oven burner -
Unscrew the thermocouple from the control. Inside the oven cavity,
the thermocouple is found just above the burner on the rear wall. Unscrew the
locknut and pull out the thermocouple from the rear of the appliance.
10. Removing Drop Down Oven Door
Open the door and engage catch to hook on each hinge. Lift the door and pull out of
front trim.
14