18
Spinel S.r.l.
WARRANTY
The warranty is valid for a period of 12 months from the date of machine delivery by SPINEL
S.r.l.
Such date must be proved by a document of transport issued by SPINEL s.r.l. showing the delivery
date and machine identification details (type, model, serial number).
If defects to material or workmanship are found and acknowledged during the warranty period,
SPINEL s.r.l. undertakes to repair or replace faulty components free of charge.
Transport fees are at buyer’s expense. If the same failure occurs several times or if transport fees
are considered excessive, SPINEL s.r.l., as it deems necessary, will replace the faulty machine
with another one of the same model or with a different model of the same value. Any repair or
replacement of components or machines will not extend the warranty period in any way.
WARRANTY EXCEPTION CLAUSES
Repairs and/or spare parts replacement will not be covered by warranty if failures are caused by
deterioration to products that cannot be attributed ot the manufacturer, such as:
Misuse of the equipment regardless the operating instructions provided by manufacturer in the
instruction manual;
Negligence, careless use and incorrect maintenance by the consumer due to failure to comply
with the above and with the guidelines in the user’s manual;
Incorrect installation;
Maintenance or repairs carried out by non-authorized personnel and/or employing components
not provided by SPINEL s.r.l.;
Breakdowns and failures caused by transport and shipping with non-original packaging;
Frost;
Build-up of scale in the pipes;
Fire, flood, inductive/static discharge caused by lightning or other phenomena outside the
machine, power outages, voltage variations or anomalies.
The warranty also does not include:
Removable parts (buttons, lights, filters, seals, etc.) and all consumables that need to be
replaced during normal use of the machine;
Aesthetic or colouring defects if not disputed at the time of purchase;
Faults attributable to consumables (coffee) in terms of flavor, color, density, extraction time
(except the delivery temperature);
All parts in which bad operation and/or breakdown to be attributed to failure to remove scale or
to carry out routine maintenance as specified by the manufacturer.
SPINEL refuses to accept any liability for harm or injury to persons or damage to things arising
from failure to observe the regulations contained in this manual.
The information and characteristics provided in this manual are not binding for SPINEL S.r.l., the
machine manufacturer, which reserves the right to make changes to its models at any time.
Summary of Contents for PINOCCHIO C
Page 1: ...Spinel S r l 1 ...
