21/06/2018
Vers. 01/18
11
The ozone maker is designed to remove odors in unoccupied spaces. The unit has a timer that will
enable it to run for a maximum duration of 2 hours. The timer will then shut the commercial air purifier off.
You should allow 40 minutes before returning to the treated area.
To operate the ozone maker:
➢
Close off the desired area to be treated.
➢
Remove all occupants and pets.
➢
Position the unit as close as possible to the odor source.
➢
In such environments as motels that have individual heating and cooling systems, turn the fan on
and set on re-circulate.
➢
Set timer to desired time and leave the room.
➢
Allow 40 minutes before re-entering the treated space.
➢
Return to space & ventilation area.
When the air purifier no longer produces enough ozone to be effective, the ozone plate should be
replaced
.
(Usually it should be replaced after working 6000 hours)
How to replace a plate
:
5) Turn the unit off and unplug from outlet.
6) Use a screw driver to unfasten cover screw and remove cover.
7) Pull ceramic plate out of ozone generator module.
8) Install ceramic plate as shown in left figure (be careful not to drop the plate).
