Copyright © 2020 Spiker Engineering. All Rights Reserved.
This installation manual was written with emphasis on clearly illustrating and explaining every step involved. The
actual installation process is quite easy and should take less than 30 minutes. To get you started, below is an
overview of the steps involved in the installation:
Installation Steps:
1.
Preparation
2.
Remove the A-pillar handle screw
3.
Install the mounting bracket
4.
Route the cable
5.
Enjoy a beverage of your choice to celebrate!
The figure below provides an overall view of the components involved in the installation, please refer to it as you go
through the steps in the following sections.
Quick Start Guide
