SK599-AT5
Diesel engine truck
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
10-23
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll r
ight
s
re
se
rve
d
.
Replacing air filter / oil separator EAS system
Replacing the air filter / oil separator (
) must be carried out as described below.
1. Remove the air filter / oil separator by turning it counterclockwise;
2. Replace the sealing ring and lightly grease the new sealing ring;
3. Turn on the new air filter / oil separator to the filter casing;
4. Tighten the air filter / oil separator by hand for approx. ¾ turn (270°);
5. Pressurize circuit 4 of the pneumatic system;
6. Check the air filter / oil separator for air leakage.
10.6.
Drive belts diesel engine truck
10.6.1.
Poly-V-belt
The water pump and the fan for forced cooling are driven by the poly-V-belt.
CONDITIONS
There must be no pressure on circuit 4 (10 litres tank) of the pneumatic system.
CHECK / TEST!
Check and replace timely the poly-V-belts to prevent damage to the engine.
For more information, see § 5.2.1. Maintenance schedule diesel engine truck.
CAUTION!
Always mount a new poly-V-belt of the same type
(see § 14.1. Maintenance
Picture 10-24
