SK599-AT5
Hydraulic system
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
8-5
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll r
ight
s
re
se
rve
d
.
8.3.2.
Replacing the hydraulic coarse filter
The hydraulic coarse filter (
) is situated in the left-hand engine cowling.
Replace the hydraulic coarse filter:
1. Erect the crane till the tower is vertically positioned en secured;
2. Remove the left-hand cover plate of the engine cowling (see
);
3. Replace the filter:
-
Rotate the filter using a strap wrench;
-
Lightly grease the sealing ring of the new filter;
-
Mount the new filter and screw it tightly by hand;
4. Start the engine and let it run for a few minutes;
5. Check the oil level (see
) and top up if necessary
(see
);
6. Check for leakage;
7. Mount the removed cover plate;
8. Fold the crane.
CHECK / TEST!
Timely replace the hydraulic coarse filter to prevent damage to the hydraulic
system.
For more information, see § 5.2.6. Maintenance schedule hydraulic system truck.
Picture 8-5
