SK599-AT5
Lighting
Truck
7-14
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll r
ight
s
re
se
rve
d
.
7.13.
Work lamps
There are two types of work lamps mounted on the truck. The first type work lamp (see
) is
mounted to the engine cowling, above the tail lights and at the outrigger beams.
The second type, the Xenon lamp (see
), is mounted at the lower side of the tower.
Replacing lamp
1. Unscrew the cap of the fitting;
2. Replace the lamp:
-
Remove the cables;
-
Release the clamping spring and turn it away from the lamp base;
-
Replace the lamp;
-
Mount the clamping spring;
-
Connect the cables;
3. Check the operation of the lamp;
4. Mount the cap on the fitting.
The second type is a Xenon lamp. If this lamp is defective, the entire unit must be replaced.
It is the easiest way for replacing if the tower is standing vertically as shown in
Picture 7-19
Picture 7-20
