SK597-AT4
Operating the truck
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 1.2
3-23
M
ei
2
0
1
8
C
h
a
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
8
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
3.9.2.
Main screen
The main screen shows (current) system information, which is divided on five different pages:
•
General screen (see
§ 3.9.2.1. Main screen: General screen
•
Axles screen (see
§ 3.9.2.3. Main screen: Axles screen
•
Tyre pressure system (see
§ 3.9.2.4. Main screen: Tyre pressure screen
•
Regeneration screen (see
§ 3.9.2.5. Main screen: Regeneration screen
•
Error screen (see
§ 3.9.2.6. Main screen: Error screen
Switch 6
enables the user to navigate to various pages on the
main screen
.
3.9.2.1.
Main screen: General screen
The
Main screen: General screen
In this screen statuses, active settings and/or system errors are displayed by symbols or text lines.
In the top bar (A) of the screen, current warnings are displayed in red and yellow.
If more than seven warnings are active, these warnings can be displayed on another screen
(see
§ 3.9.2.6. Main screen: Error screen
).
These warnings are displayed in all screens. In the red/yellow block B, the total number of red or yellow
warnings are shown (in this example 4 red and 3 yellow warnings).
the various symbols are explained.
In the second section C, symbols light up white to indicate that these functions are enabled.
Once a function is disabled, this white symbol will disappear from the screen.
Below the white symbols on the left side of the screen D, is displayed which light is switched on.
When operating switch 7 (
) on the dashboard, the symbol
DRL
(
Daylight Running
Lamps
) appears.
By operating this button once again, this symbol will disappear and at the same place the symbol
parking light
will appear.
By operating this button one last time, the symbol
low beam
will appear.
Picture 3-11
A
B
C
D
E
F
G
H