2
3. Technical Data
1)
2)
The values were determined with free, unreduced in- an outlet.
Noise emission values obtained according to the EN 12639 regulation. Measurement method according to
EN ISO 3744.
4. Scope of delivery
5. Installation
5.1.
General installation information
9
The liquid to be discharged must not contain any abrasive matters - such as sand, for
instance. If the pumped liquid actually does contain matters of this kind, the use of an intake
filter is indispensable. The fluid being discharged must not exceed the maximum temperature
indicated in the technical specification.
With storage containers from and above 1,000 litres the pump, by virtue of legal provisions,
must only be used if the fuel nozzle is equipped with an automatic stop feature (not included in
the scope of delivery).
Model
63,'275
Mains voltage / frequency
230 V ~ 50 Hz
Nominal performance
550 Watt
Protection type
IP X4
Suction port
30.93 mm
(1 “)
, female
Pressure port
30.93 mm
(1 “)
, female
Max. flow rate (Q
max
)
1)
2,100 l/h
Max. pressure
3.5 bar
Max. delivery height (H
max
)
1)
35 m
Max. suction height
5 m
Max. size of the solids being pumped
0 mm
Max. ambient temperature
40 °C
Max. fluid temperature (T
max
)
40 °C
Connection cable
1.5 m
Cable type
H07RN-F
Weight (net)
10.0 kg
Guaranteed sound power level (L
WA
)
2)
68 dB
Measured sound power level (L
WA
)
2)
64.1 dB
Sound pressure level (L
pA
)
2)
56.1 dB
Dimensions (L x D x H)
26 x 15 x 18 cm
Item no.
The scope of delivery includes a suction hose, an intake filter with a check (or non-return) valve, a pistol-type fuel
nozzle (without automatic stop feature), connection pieces, hose clamps and sealing rings.
When installing the unit, please make sure that the pump housing and the intake line are fully
vented, i.e. filled with the liquid being discharged. If this venting requirement is not observed,
the pump will not take in the liquid being discharged.
During the entire process of installation, the device must not be connected to the electrical
mains.
The pump is to be set up in a dry location, with the ambient temperature not to exceed 40°C.
The pump including the entire connection system has to be protected from frost and weather
influence.
Summary of Contents for 002650
Page 3: ...75...
