Spicles BIGGEST, Instruction Manual

Page: 18 / 18

17
-Engaging in extreme riding is extremely dangerous and should be avoided. Although many
articles/advertisements/catalogue depict riders in extreme terrain this not recommended nor permitted and you
can be seriously injured or killed if you perform extreme riding.
-Bicycles and bicycle parts have strength and integrity limitations and extreme riding should not be performed or
you risk damaging the components or becoming seriously injured or killed.
-Failure to confirm proper installation, comparability, proper operation, or maintenance of any component or
accessory can result in serious injury or death.
-After any incident you must consider your bike unsafe to ride until you consult with a certified bicycle service
provider for a comprehensive inspection.
-Failure to properly charge, store, or use your battery will void the warranty and may cause a hazardous situation.
-Extreme care should be taken when using the pedal assistance sensor on this product. Ensure you understand
and are prepared for the power assistance to prepare you as soon as pedaling is underway.
-You should check the operation of the brake inhibitor switches before each side. The brake system is equipped
with an inhibitor which shuts down power to the electric motor whenever the brakes are engaged. Check proper
operation slowly while in a controlled environment by riding slowly with the motor engaged and applying the
brake levers are engaged.
-User must understand the operation of the twist throttle and pedal assist sensors before using, and take care in
their usage in respect to traveling at speeds appropriate for usage area and user experience level. Always use the
lowest assist level until you are comfortable with the bike and feel confident in controlling the power.
-Any changes to the product not expressly approve by SPICLES could void warranty and care while riding.
-Because electric bikes are heavier and faster than normal bicycles, they require extra caution and care while
riding.
-To avoid shock never submerge the electrical components in water or subject to salt water environments.