SPHINX
Project Two Mk2 Service Manual
7
6. SPHINX REMOTE CONTROL
This single Sphinx Remote Control lets you control
all functions: not only of the Project Two Mk2, but
also of all other Sphinx equipment.
Only the following buttons and indications on the
Remote apply to the Project Two Mk2 (the others
will not function):
Buttons and LED indication
1.
PRE-AMP
: To select the pre-amp.
All buttons pressed hereafter will control only
the pre-amp functions.
Note: TUNER and CD have no function.
2.
STANDBY:
Use this button to switch the Project
Two Mk2 to stand-by.
3.
: Pressing this button mutes the outputs
(temporarily) and you will not hear any sound.
The red LED will be illuminated. Another press
on this button un-mutes the outputs.
4.
TAPE/MONITOR:
Use this button to select the
Tape IN input. Pressing this button has the
same effect as pressing the TAPE button on the
front panel.
Note: The LED of the selected input (see 4.) will
remain illuminated.
5.
1 - 6
: To select inputs CD SYM to LINE 3
(
Note: 7, 8, 9 and 0 do not function
):
1
CD SYM balanced CD input
2
CD
unbalanced CD input
3
TUNER unbalanced Tuner
4
LINE 1
unbalanced line input 1
5
LINE 2
unbalanced line input 2
6
LINE 3
unbalanced line input 3
6.
ñ
-button: Pressing this big triangular button has
the same effect as rotating the VOLUME control
on the front panel clockwise. You increase the
volume and the volume control will turn
clockwise.
7.
ò
-button: Pressing this big triangular button has
the same effect as rotating the VOLUME control
on the front panel anti-clockwise. You decrease
the volume and the volume control will turn
counter-clockwise.
Note: The
ñ
- and
ò
-button by default control
volume of the Project Two Mk2 only, even if you
have selected Tuner or CD.
