SPHINX
Project Two Mk2 Service Manual
3
The Sphinx Project Two Mk2 design principles
The Sphinx Project Two Mk2 was designed for the
ever-increasing group of quality-conscious
audiophiles.
We are very proud of the tradition connected with
the SPHINX name, especially concerning audio
quality perfection.
This service manual will help you to optimally
service and repair the Sphinx Project Two Mk2 Pre-
Amp.
This pre-amp is extremely simple to operate and
uses the newest technologies and refined designs.
Designs that have successfully been used in the
award winning Project Eight.
Features include ultra-linear extremely low-noise
Class A audio circuits, built from the finest hand-
selected parts.
The signal path is completely balanced from input to
output, and left and right are totally separated.
The power supply is of a unique design (fully Class-
A!) and consists of three completely separate and
independent sections: one for the digital control plus
one each for the left and right channel.
The ALPS volume control is motor-controlled.
All settings and controls can also be accessed from
the supplied Sphinx
Remote Control
.
To obtain the maximum quality from this pre amp it
is necessary for it to be properly aligned and to be
used with top quality audio components, preferably
other Sphinx components.
1. UNPACKING
Before leaving the factory every Project Two Mk2 is
subjected to stringent and extensive technical and
exterior quality inspection. This ensures the user
many years of high quality audio from a perfect-
looking product.
We recommend owners to ship the Project Two
Mk2 in its original carton.
After unpacking the Project Two Mk2 we therefore
recommend you carefully check it for any transport
damage.
If you find any damage and the product has not
been shipped in the original carton the ensuring
repair costs will not be covered by the warranty.
2. SPHINX WARRANTY CARD
To be entitled to any warranty repairs the owner
must have send the filled out warranty card to
Sphinx or a distributor where it has been registered.
Other regulations may apply in your specific
country: when in doubt, please consult the proper
authorities.
3. CONTACTING THE MANUFACTURER
In case of any problem not covered in this manual
or if you have other questions you may contact the
Sphinx International Service Department
in The
Netherlands (local time: GMT +1h) during office
hours at the following numbers:
Telephone
(+31) 35 602 0302
Fax
(+31) 35 602 2806
It is always very helpful and efficient if you have all
relevant information about the specific product and
the problem ready.
Please also refer to the User Manual of the
Project Two Mk2 for information about
functions not described in this manual.
It is important to familiarise yourself with the
special functions, operation and possibilities
of the Sphinx Project Two Mk2.
