SPHINX
Project Twelve
5
Rear panel
1.
BALANCED/UNBALANCED
: With this switch
you may select the input (4.) to balanced
(switch IN) or unbalanced.
2.
CONTROL IN:
To connect the optical cable
from another Sphinx component like a pre-amp.
CONTROL OUT:
To connect the optical cable
that goes to another Sphinx component.
3.
XLR input
: To connect the XLR cable from the
pre-amp output.
4. POWER:
This is the mains master switch.
MAINS:
To connect the power amp to a mains
outlet (230 - 240 VAC).
5. OUTPUT:
To connect the cable from the
loudspeaker:
red
+
white
-
6.
Cinch:
To connect the cinch cable from the pre-
amp output.
