SPHINX
Project Twelve
10
6. CARE AND MAINTENANCE
Clean the exterior with a soft, lint-free, anti-static
cloth. Do not use force while wiping the surface.
To remove difficult stains use a few drops of
detergent on a moist cloth, sweep carefully and
wipe dry afterwards.
If some scratching occurs, please consult your
Sphinx dealer first. He can give you advice about
possible solutions.
Do not use polishing or cleaning agents
: they
may damage the sensitive acrylic finish of the
Project Twelve.
Do not use aerosol cleaning agents
.
Most contain solvents which might react with and
damage the acrylic finish.
7. TECHNICAL SPECIFICATIONS
Bandwidth
0 - 1.5 MHz (+0/-3 dB)
0 - 203,000 Hz after RF input filter
Phase response error
<1° (0 - 20,000 Hz)
Gain
Balanced
29.5 dB max. (x 29.9)
Unbalanced
29.5 dB max. (x 29.9)
Minimum Power Output (1 - 20,000 Hz)
>151 W into 8 ohm (21.8 dBW), THD<0.01%
>246 W into 4 ohm (23.9 dBW), THD<0.01%
>340 W into 2 ohm (25.3 dBW), THD<0.01%
Output voltage / current, max.
36 V / 16 A
THD+N (IHF-A)
<0.008% (100 W into 8 ohm, 1 - 20,000 Hz)
IMD
<0.010% (70 W into 8 ohm)
S/N ratio (IHF-A)
>120 Db
Slew rate
>100 V/µs
Damping factor
>600 (1 - 1,000 Hz)
Input
XLR balanced / Cinch unbalanced
Level, nominal
1.25 V (1.9 dBV) / 1.25 V (1.9 dBV)
Impedance
600 ohm / 20 kohm
Supply capacitance
26.920 µF total
Power consumption
600 W max. (5 W standby)
Dimensions (h x w x d)
68 x 250 x 340 mm
Weight
6.5 kg / 14.33Lb
This unit conforms to the EMC interference regulations issued by the EU and to the CE standards.
This unit complies with safety regulation VDE 0860 and therefore with international safety regulation IEC 65.
Technical specifications may be changed by SPHINX without prior notice if technical developments make this
necessary.
©1999 Audioscript BV
