SPHINX
Project Eighteen
9
6. CARE AND MAINTENANCE
Clean the exterior with a soft, lint-free, anti-static
cloth. Do not use force while wiping the surface.
To remove difficult stains use a few drops of
detergent on a moist cloth, sweep carefully and
wipe dry afterwards.
If some scratching might occur, please first consult
your Sphinx dealer. He can give you advice about
possible solutions.
Do not use polishing or cleaning agents
: they
may damage the sensitive acrylic finish.
Do not use aerosol cleaning agents
.
Most contain solvents which might actively react
and damage the acrylic finish.
7. TECHNICAL SPECIFICATIONS
Bandwidth
0 - 100,000 Hz (+0/-1 dB, with input filter)
Phase response error
<1° (0 - 20,000 Hz)
Gain
30 dB max.
Minimum Power Output (1 - 20,000 Hz)
>2x 160 W into 8 ohm (22.0 dBW), THD<0.01%
>2x 280 W into 4 ohm (24.5 dBW), THD<0.01%
>2x 420 W into 2 ohm (26.2 dBW), THD<0.01%
Output voltage / current, max.
36 V / 43 A
THD+N (IHF-A)
<0.01% (1 W into 8 ohm, 1 - 20,000 Hz)
IMD
<0.01% (100 W into 8 ohm)
S/N ratio (IHF-A)
>120 dB (1 W into 8 ohm)
Common Mode Rejection Ratio
>80 dB (@ 100 Hz)
Slew rate
>50 V/µs
Damping factor
>2000 (1 - 20,000 Hz)
Input
cinch: unbalanced / XLR: balanced
level, nominal
1.25V ( 1.9 dBV) / 1.25 V ( 1.9 dBV)
impedance
20 kohm / 600 ohm
Supply capacitance
132,000 µF total
Power consumption
1500 W max. (70 W standby)
Dimensions (h x w x d)
143 x 482 x 452 mm
Weight
24 kg
This unit conforms to the EMC interference regulations from the EU and to the CE standards.
This unit complies with safety regulation VDE 0860 and thus with international safety regulation IEC 65.
Technical specifications can be changed by SPHINX without prior notice if technical developments make this
necessary.
©1999 Audioscript BV
