2.3 - AIR CONTIDITONER OPERATION – GLW210 CONTROLLER - AIR REFRESHMENT AND HEATING
When the ignition key is turned, the display will first show the controller’s software version, right after, the internal temperature of the vehicle. Before the start
the display will show the initials AL.
The controller monitors 3 temperature sensors placed in the vehicle in the following order:
a) Internal temperature sensor: located in the air return air conditioning system (see components);
b) External temperature sensor: located outside the air conditioning equipment;
c) Duct temperature sensor: located in the air ducts.
8
11
10
9
14
13
12
2
3
7
1
5
6
4
1 – Numeric Display
2 – Ventilation control key (VENT.)
3 – Cooling control key (AUTO)
4 – Refresh control key (RENOV.)
5 – Key (INCREASE)
6 – Key (DECREASE)
7 – Key internal/external temperature checking (TEMP.)
8 - Indicator “cooling mode”
9 - Indicator “automatic mode”
10 - Indicator “ventilation mode low velocity”
11 - Indicator “ventilation mode high velocity”
12 - Indicator “refreshment mode “ off
13 - Indicator “refreshment mode “ on
14 - Indicator “internal/external temperature checking”
Operation
32
