1) When due to the installation environment or working loads, the system can't
continuously stabilize the battery voltage to a constant level, the controller will initiate a
timing process, and 3 hours after the battery voltage reaches the set value, the system
will automatically switch to equalizing charging.
2) If no calibration has been done to the controller clock, the controller will perform
equalizing charging regularly according to its internal clock.
Floating charging
When finishing the sustaining charging stage, the controller will switch to floating
charging in which the controller lowers the battery voltage by diminishing the
charging current and keeps the battery voltage at the set value of floating charging
voltage. In the floating charging process, very light charging is carried out for the
battery to maintain it at full state. At this stage, the loads can access almost all the
solar power. If the loads consume more power than the solar panel could provide, the
controller will not be able to keep the battery voltage at the floating charging stage.
When the battery voltage drops to the set value for returning to boost charging, the
system will exit floating charging and reenter into fast charging.
2. Product Installation
2.1 Installation Precautions
◆
Be very careful when installing the battery. For open lead-acid batteries, wear a pair
of goggles during installation, and in case of contact with battery acid, flush with water
immediately.
◆
In order to prevent the battery from being short-circuited, no metal objects shall be
placed near the battery.
◆
Acid gas may be generated during battery charging, thus make sure the ambient
environment is well ventilated.
More information https://www.caravansplus.com.au
