4-Way wiring
Indicator Light
7. Turn on the power at the circuit breaker.
8. Test to see that the Smart Switch is functioning by pressing
the ON/OFF switch. Your load (lights) should turn ON/OFF
respectively.
Note:
If your lights do not turn on, check that the live/load and
traveler wires are all connected according to the old switch.
Turn off power at the circuit breaker and check the wiring.
9. WiZ app setup – Refer to “WiZ Quick Setup Guide”
OFF
ON
OFF
ON
OF
F
ON
OF
F
ON
COLOR
INDICATOR LIGHT
STATUS
SWITCH STATUS
WHITE
ON
Switch is OFF
OFF
Switch is ON
RED
Flashing Quickly
Pairing failed
WHITE
Single Blink
Ready for Smart
pairing
mode
Double Blink
Ready for Manual
pairing
mode
Neutral
Approved switch locations
Hot
3-Way
4-Way
3-Way
Mains
Note:
Only one Smart 3-way switch is required at the approved switch locations.
Note:
Neutral wire required.
Note:
Smart pairing mode is entered automatically once connected to power during
initial setup. Smart and Manual pairing modes can be selected within the WiZ App.
