background image

13 WWW.SPEXSEATING.COM

SPEX HEAD SUPPORT USER MANUAL

 WARNING

9.  The Spex Seating System must only be used for forward-facing 

seating in motor vehicles. 

10.  In order to reduce the potential of injury to vehicle occupants, 

wheelchair-mounted rigid trays not specifically intended for use 

during travel in motor vehicles must be:
a.  Removed and secured separately in the vehicle or
b.  Secured to the wheelchair so they will not break free in 

a crash and 
•  Be positioned with a gap of at least 3” (75 mm) between the 

back edge of the tray and the wheelchair occupant’s abdomen 

and/or chest so as not to interfere with the proper belt-

restraint use, and 

•  Have energy absorbing padding placed between the back 

edge of the tray and the wheelchair occupant.

11.  Alterations or substitutions must not be made to the 

seating system structure, parts or components, without first 

consulting Medifab.

12.  The use of a postural pelvic belt attached to the wheelchair base or 

seat frame is encouraged during travel, but these belts should be 

positioned so that they don’t interfere with the proper positioning 

of crashworthy belt restraints, and they should not be relied on for 

occupant protection in crash situations unless the postural belt has 

been designed to comply with, and perform to the requirements of 

WC19.

13.  Postural support devices that are not labelled as conforming to 

ISO 16840-4 may be used when in a vehicle, but should not be 

relied on for occupant restraint.

Summary of Contents for Head Support

















Reviews: