TROUBLESHOOTING
If one or more of the pipettes inserted into the Pipette Washer are not being washed, make note of which units are not functioning
and turn the water off at the source. Tilt the Pipette Washer Cabinet so as to be able to view the bottom of the unit. Look for
any disconnected tubes or loose pipette connectors. If any connections are loose, tighten them slightly. Set the unit back to its
upright position and turn the water on again. The unit should now be working properly.
NOTE: If any of the tubing is cracked or broken, remove it. Acquire some similar sized tubing (the tubing inside the unit is
standard 1/4” I.D. x 3/8” O.D. plastic tubing) from the lab. Cut a piece of tubing to match the size of the existing tubing currently in
use, and re-insert it into the affected area. If you do not have similar sized tubing, call us to order replacement tubing for your
unit.
PRODUCT SPECIFICATIONS
Every effort has been made to provide complete and accurate product operation and information in this manual. However,
since specifications are subject to change without notice, changes may be made from time to time to improve the performance
of the product. Therefore, slight changes that are not reflected in the current illustrations should be considered minor and
inconsequential for the purposes of this operating manual.
TO ARRANGE A RETURN SHIPMENT
We want you to be happy with anything you purchase from SPEX CertiPrep. Please bring any problem to our attention, but
please DO NOT RETURN any item before contacting us for a Return Authorization Number and instructions. Unauthorized
returns will be refused. Cost for all return transportation is the responsibility of the customer. Credit for returned merchandise
will be issued only after goods have been received and inspected. Returned goods are subject to a 25% restocking fee up to a
maximum of $200.00.
QUESTIONS
If you have any questions about the operation of your Pipette Washer/Dryer, please call the SPEX CertiPrep Chemical Reference
Material (CRM) Division at 1.800.LAB.SPEX or 732.549.7144, extension 444.
Operation Manual
Pipette Washer/Dryer
(cont’d)
Phone: 800.LAB.SPEX • 732.549.7144 • Fax: 732.603.9647
[email protected] • spexcertiprep.com
CONNECT WITH US
Contact Us
© 2020 SPEX CertiPrep. All Rights Reserved.
