Sperry Marine 5016-CA, Operation, Installaion And Service Manual

Page: 62 / 132

056376/A Analogue Compass Repeaters
6-10 Configuration Parameters
Status Selection
Selects the accepted NMEA 0183/IEC 61162 sentences for heading
source selection.
This setting is only effective in Sperry NAVIGAT gyrocompass systems,
which generate the respective proprietary “nav. status” sentences.
Settings: automatic
No restriction. Accept, in the following order of priority:
- $PPLAN
- $PPNSD
PPLAN
Accept $PPLAN only.
PPNSD
Accept $PPNSD only.
Dimming Selection
Selects the accepted NMEA 0183/IEC 61162 sentences for serial dimming
of the illumination brightness.
Settings: automatic
No restriction. Accept, in the following order of priority:
- $PPLAI (proprietary)
- $--DDC (standard)
PPLAI
Accept the proprietary $PPLAI sentence only.
xxDDC
Accept $--DDC with any talker ID.
Dimming Group ID
Assigns the repeater to a dim group.
This setting is only effective when the proprietary $PPLAI sentence is
used for serial dimming
Setting: 00 – 99
Select an ID between “01” and “99” to assign the repeater
to the respective dim group.
Selecting ID “00” lets the repeater accept any dim command
received, regardless of group assignment.