Sper scientific Large Display Conductivity Pen - 850037, Manual

Page: 9 / 56

9
5. When in P1.0, press ▲ to advance to
the next setup function or press SET
for more than 2 seconds to return to
Measurement Mode.
Resetting the Pen (rSt)
When the pen is reset, all parameters
will be reset to factory default values.
1. Press
SET
for 2 seconds to enter setup.
2. Press ▲ to select the reset pen setting.
“rst” will appear on the main display of
the LCD and “P3.0” will appear on the
secondary display.
3. Press
SET
again for less than one
second to enter the reset setting.
4. Press ▲ to select Y (yes) or N (no).
- 11 -
SETUP MODE
Press and
hold
Press
for less
than 1
second
Press
and
hold