8
SETUP MODE
The advanced Setup Mode allows you
to customize the pen’s preferences and
defaults:
1. Press
SET
to turn the pen
on
.
2. From Measurement Mode, press
SET
for more than 2 seconds to enter Setup
Mode and change parameters.
Temperature Units (tUt)
To select the Celsius or Fahrenheit
temperature scale:
1. Press
SET
for 2 seconds to enter setup.
2. “t” will appear on the primary display of
the LCD and “P1.0” will appear on the
secondary display.
3. Press
SET
again for less than one
second to enter the unit setting.
4. Press ▲ or ▼ to select C (Celsius) or
F (Fahrenheit). Press
SET
for less than
one second to confirm the unit selection.
Press
SET
for more than 2 seconds to
return to P1.0 without saving.
Summary of Contents for Large Display Conductivity Pen - 850037
