8
1. Unscrew the storage bottle and remove it
from the probe, exposing the electrode.
2. Place the electrode into the test solution.
3 . Press
POWER
button to turn the meter
on
.
4. Stir the probe gently to create a
homogeneous sample and shorten the
stabilizing time.
5. The pH decimal point will flash to indicate
that the meter is in Measurement Mode.
6. The pH value displays on the LCD. Model
850063 also displays the temperature.
7 . Press
POWER
button to turn the meter
off
.
8. Rinse the electrode with deionized water, a
rinse solution, or tap water.
4
Rotate the
storage bottle in
counter-clockwise
direction and then pull out
the bottle completely to expose the electrode.
Electrode
2. Dip the electrode into the test solution.
Press " " to power on the meter
and tir it to get a stable reading.
3. A small dot " " is flashing while the
meter is in measurement mode. The
LCD not only shows the measured pH
value but also displays the temperature
in model 8692.
8692
WARNING: For pH meters, please
always make the bottle is filled with
storage buffer to keep the electrode
wet and in a good storage condition.
ATC
C
O
