20
21
DATALOGGER
Note…
To enable/disable the touch-tone feature, see page 13.
Manual Datalogging
1. Set the sampling time to 0 seconds. Refer to page 14.
2. Press
REC
. “REC will appear on the LCD.
3. Press
LOGGER
. “REC” will flash on the LCD and the
alarm will sound while the measurement data and time
information are saved to memory. The position (location)
number will appear on the bottom of the LCD and will also
be recorded on the SD card.
Note…
To enable/disable the touch-tone feature, see page 13. To
change the position number, press ▼. The position number
will flash on the LCD. Press ▲ or ▼ to set the position
number (from 1 to 99). To indicate the position location, P x
(x = 1 to 99) will appear on the lower display. After selecting
the position number, press
ENTER
to confirm.
4. To finish datalogging, press REC for longer than 2
seconds. “REC” will disappear from the LCD to indicate
that datalogging has ended.
SD Card Data Structure
1. The first time a SD card is used in this meter, a folder
AMA01 will be generated.
