11
SETUP MODE
The advanced Setup Mode allows you to customize the
following meter preferences and defaults:
● Real Time Clock
● Decimal Type
● Auto Power Off
● Touch-Tone
● Thermometer Type K/J
● Temperature Units
● Sampling Time
● SD Memory Card Format
Note…
The setup functions can be performed under any parameter
but not while utilizing the datalogger function. Once
selections are saved, the meter will default to the selected
preferences when the meter is turned
off
and
on
again.
Once a selection is saved, the meter automatically advances
to the next setup function (i.e., after setting the real time
clock, the meter will automatically enter the decimal type
setup function).
1. Press
POWER
to turn the meter on.
2. Press
SET
for 2 seconds or longer to enter Setup Mode.
3. Press
NEXT
to cycle through the setup functions.
