5
MEASUREMENT PROCEDURES
1. Press to turn on the unit.
2. Select for mG or for μT.
3. Position the front (page 6, Figure 1) of
the meter to measure the electromagnetic
waves. Change the measurement angle or
position to obtain the highest reading value
(page 6, Figure 2-6).
4. Read the measured value. The
display of “OL” indicates an overload.
Press to select a higher range and
repeat the measurement.
Note...
Due to normal environmental magnetic
fields, the meter may display a reading below
0.5mG prior to measuring. This is not a
malfunction of the device.
5. To freeze the current reading displayed on
the LCD, press . Press again to
resume active measurement.
6. To retain the maximum value,
press and the reading value displayed
on the LCD will continually update the
maximum value.
Summary of Contents for 840045
Page 1: ...EMF Meter 840045...
