Maximum/Minimum
(cont.)
4. The lowest recorded temperature is displayed. The dis-
play will change only if/when a lower temperature is re-
corded.
ADVANCED FUNCTIONS
Average
1. Pull the
Trigger
(3), then press the
Function
(19) but-
ton as needed until
AVG
(11)
appears on the display.
2. The average recorded temperature is displayed.
3. Max/Min and Average temperatures are erased when
the thermometer turns off.
Delta or Difference ( ∆T)
1. Pull the
Trigger
(3), then press the
Function
(19) but-
ton until
∆T
(11)
appears on the display.
2. While scanning, the display shows the difference be-
tween the highest (max) and the lowest (min) recorded
temperature from the time the
Trigger
is pulled to when
it is released.
3. Release the trigger and use the
Function
(19) button to
cycle through MAX, MIN, AVG and ∆T
recorded tem-
peratures.
10
MEASUREMENT PROCEDURES
7
Measure Temperature
(Scan)
1. Slide the
Laser
ON/OFF selector switch (5) to turn the
Laser Guide
(1) on or off.
2. Slide the
°C
/
°F
selector switch (4) to the desired tem-
perature scale.
3. Point the IR Gun at the object to be measured, pull and
hold the
Trigger
(3) to obtain a continually updated tem-
perature.
4.
SCAN
(8) flashes on the display while the Trigger is de-
pressed.
5. Release the
Trigger
(3),
HOLD
(8) and the last tem-
perature reading is displayed for approximately six (6)
seconds until the thermometer turns off
